2026 Annual Meeting Technical Papers

Technical Paper presentations are essential to achieving one of the association's key objectives, which is to be "the premier forum to interact and exchange knowledge among formulators and suppliers." 

To access Technical Paper content you MUST be logged in to your member account.

Novel Toughening Agents for fast cure adhesives
Brian Churchill, Kaneka North America LLC
Some modifiers for toughening thermosetting systems exhibit significant drawbacks including depression of the glass transition temperature, instability of the formulation, and difficulty of use. Core Shell Rubber (CSR) particles have been used successfully for more than 40 years in toughening thermoplastic applications but have limited success in thermosetting systems due to agglomeration of the particles. The agglomeration of the particles results in a non-homogeneous composite and corresponding poor and inconsistent performance attributes.Kaneka Kane Ace MX utilizes a proprietary process for dispersing core shell domains into various thermosetting resins. The CSR particles are perfectly dispersed and remain so during storage and the formulating process. The resulting composite exhibits improved fracture toughness, impact, and flexural properties, without sacrificing the glass transition temperature. The novel toughening agents are supplied as easy to formulate master-batches that can be used in Epoxy, Polyurethane, and Vinyl Ester systems. Because of the specific and technical design of the Core Shell the master-batch easily mixes and disperses throughout the composite formula resulting in a matrix with better impact, fracture toughness, and flexural properties.The presentation will use various tests methods to demonstrate the improvements that can be achieved by using the novel toughening agents in fast cure two part systems. 


Epoxy Fracture Toughness using Reactive and Nonreactive POSS Cage Motifs
Joseph D. Lichtenhan, Hybrid Plastics Inc
Epoxy is a mainstay resin class because it is familiar, affordable, readily formulated, and provides high temperature dimensional stability.  Historically, cured epoxies resins were considered amorphous because they lack long range order. Recent examinations however describe epoxy network structure as highly cross-linked clusters (nodes of 15-100 nm diameters) within regions of lower crosslink density.In this light this new conceptual epoxy thermoset model bears some resemblance to the model of semicrystalline thermoplastics.  High density crystallites (or nodes) entrapped within lower density amorphous regions. A notable difference is the high molecular weight of thermoplastic chain entanglements (which provide toughening), while little is understood about the non-covalent entanglement of epoxy networks. It was the intent of this study to examine the ability of well-defined rigid 1.5-5.0 nm POSS cage motifs to perturb the time-temperature dependence of the lower density nodes of the epoxy network.  This approach works well for semicrystalline thermoplastics, but can it also work for a traditional thermoset?  Two epoxy networks were investigated. One was a bis-F resin cured by propylene diamine, and the second was a bis-F resin homopolymerized by catalytic imidazole.  Reactive and non-reactive POSS cages were incorporated at 2-5 wt.% additives into each system.  The time dependent properties of each formulation were characterized using traditional DMA, Torsional DMA Fracture Toughness, traditional Tensile, and Tensile Fracture toughness.  Fracture toughness and tensile measurements agree that cage incorporation at low loadings (the lower the better) are able manipulate the dynamics of epoxy meso-structure to improve toughness and crack propagation resistance.

 

Polybutadiene Resins for Composite Performance
Megan Casey, TotalEnergies Cray Valley
Liquid rubber resins containing butadiene have long been used as reactive tougheners for thermosetting resins. However, it has been assumed that copolymerization with acrylonitrile or presence of polar functional groups was necessary for compatibility with thermosetting resins like epoxies. In this study, polybutadiene-based resins both without and with hydroxyl and maleic anhydride functionalization were found to be compatible with epoxy, phenolic, and polyester resins, and allow excellent impregnation of glass fiber. Also fabricated fiberglass-epoxy and phenolic composites were found to have improved impact and bending strength with polybutadiene resins added to the epoxy resin formulation.  These improvements were maintained after thermal aging, and both functionalization and higher 1,2-vinyl content provided additional protection against aging. 

 

Next Generation Phenalkamine & Phenalkamide Technology
Shahid Qureshi, Bitrez
This paper and associated presentation provides an overview of a novel epoxy curing agent chemistry, designed to deliver improved curing performance at reduced temperatures and under challenging environmental conditions. The technology is based on a new generation of Phenalkamine and Phenalkamide systems that eliminate the need for conventional accelerators, several of which are currently classified as Substances of Very High Concern (SVHC).The latest Cardamine products represent a significant innovative advancement in epoxy curing agent design, offering bio-based, environmentally responsible, and safer alternatives to traditional Phenalkamine and Phenalkamide curatives. Conventional systems are known to undergo condensation reactions during storage, particularly at elevated temperatures, resulting in increased viscosity and the potential release of free amines. This phenomenon can elevate the total free amine content, and lead to unintended and unmonitored changes in product classification. This in turn can pose unidentified risks for both formulators and end users.In contrast, the new curing agents exhibit improved chemical stability and storage consistency, minimizing viscosity drift, and preventing the formation of additional free amines and bis phenols over time. As a result, these materials maintain consistent classification and performance characteristics throughout their shelf life, providing a more reliable and compliant solution for modern epoxy applications. 

 

A Low-Color Cardanol-Derived Epoxy Monomer
Rongpeng Wang, Cardolite Inc.
A very low-color, cardanol-derived monofunctional epoxy was developed and evaluated as a reactive diluent for a commercial diglycidyl ether of bisphenol A (DGEBA) resin. The monomer was incorporated at various levels within the DGEBA component. Basic physical properties, viscosity reduction, and blend stability were determined. Calculated Hansen solubility parameters were used to characterize the compatibility behavior. Cure performance was examined using triethylenetetramine, isophorone diamine, polyetheramine, and an anhydride by differential scanning calorimetry. Cured thermosets were evaluated by glass-transition-temperature measurements and tensile and flexural testing.  The epoxy monomer concentration and curative chemistry produced measurable differences in cure onset, peak temperature, reaction enthalpy, glass-transition temperature, strength, modulus, and elongation. An optimal loading provided the best balance between processing improvement and retention of mechanical properties. 

 

Recyclable Epoxy System for Electrical Castings and Insulation 
Amit Dixit, Aditya Birla Chemicals
The generation of electricity and its efficient transmission and distribution is essential part of the ecosystem. Electrical and electronic components are an integral part of all devices/machines. Epoxy resins, with their exceptional electrical insulating properties, thermal stability, adhesion, and resistance to environmental factors, play a critical role in safeguarding the electrical and electronic components. Traditionally, epoxy-anhydride systems are preferred as polymeric insulating materials for industrial applications in the field of electrical casting, potting, and encapsulation to manufacture components such as insulators, bushings, transformers, switch gear components, power generators etc. The epoxy-anhydride systems are thermoset materials hence components made from them are difficult to recycle thereby generating waste at the end-of-life. It is estimated that only a fraction of the waste generated is formally recycled and the remaining either ends up in landfills or is informally recycled. The development of recyclable epoxy systems based on the propertiary Recyclamine® technology offers a solution to this compelling issue by enabling recycling of electrical and electronic components,and further by the reuse or repurposing of the recovered materials. The recyclable epoxy system exhibits exceptional mechanical, thermal and electrical insulation properties and can be recycled by solvolysis to recover metal inserts, fillers and cleaved epoxy matrix that can be re-used and re-purposed thereby addressing the global concern on waste management and driving circularity. 

 

Thermoset Epoxy Formulations with Unique Latent Initiator
Daniel J. Miller, King Industries, Inc
Formulators are constantly looking for alternative chemistry that can provide fast, efficient cure with good physical and mechanical properties.  Epoxies are well known to many applications, but do have some inherent handling issues, like viscosity.  This presentation will discuss a unique, latent super acid catalyst that will allow formulations of one component, 100% solids, liquid epoxy-based systems that cure at temperatures between 80 and 160ºC.  With this chemistry, 1K formulations can be developed for a range of applications, including coatings, adhesives, inks or composite resin systems.  


Environmentally Friendly Waterborne Non-Isocyanate Polyurethane Coatings
Qixin Zhou, University of Akron
Driven by increasingly strict environmental regulations, the growing popularity of green building standards, and rising consumer awareness of sustainable products, green coating solutions are especially important in modern society. One obstacle to achieving green coatings is the use of hazardous and toxic isocyanates as the primary building blocks for urethane-based coatings. For example, polyurethanes are synthesized from di- or tri-isocyanates and polyols through step-growth polymerization. The coating industry is shifting towards environmentally sustainable practices, driving the development of non-isocyanate polyurethanes (NIPUs) as alternatives to traditional polyurethanes.This presentation explores our recent studies on the synthesis, characterization, and performance of NIPU coatings. The first part focuses on waterborne NIPU epoxy hybrid coatings via cyclic carbonate/amine reaction, demonstrating the impact of raw material ratios on thermal, mechanical, and general coating properties. The second part presents a bio-based waterborne NIPU coating derived from a linseed oil-based cyclic carbonate synthesized by the thiol-ene reaction. The coating exhibited comparable performance to solvent-borne NIPU and commercial isocyanate-based polyurethane coating. Together, these studies highlight the potential of waterborne NIPUs as sustainable, high-performance alternatives in the coating industry. 


Advanced Composites: A Key Enabler in Next Generation Electronics
Jeff Gotro, PhD, InnoCentrix, LLC
Composites using advanced polymers and reinforcements are a key enabler in the field of electronics packaging.  Specifically, thermoset polymers are used extensively to “package” electronic components.  An electronic package is used to connect the semiconductor chip to either substrates or printed circuit boards.  Interestingly, polymer composites have an increasing impact on the electrical, mechanical, and thermal performance of electronic devices.  The talk will highlight the structure-property-process-performance relationships that are required for advanced electronics.  The molecular structure and curing kinetics (chemistry) and the rheology and process conditions (physics) govern the properties in the fully cured network. Equally important is the strategic choice of fillers and reinforcements which are electrically conductive or electrically insulating.  The talk will focus on the challenges for the next generation of thermoset composites used in advanced packaging such as mold compounds, underfills, and low dissipation factor dielectrics. 

 

Dielectric Powder Coatings: Meeting the Demands of Electrification
Eric Casebolt, The ChemQuest Group, Inc.
As electrification continues to expand across market segments ranging from electric vehicles to industrial equipment and energy infrastructure, dielectric powder coatings are playing an increasingly important role in protecting critical electrical components. Epoxy-based powder coatings are widely used in applications such as electric motors, busbars, and battery packs, where a balance of electrical insulation, thermal conductivity, and mechanical performance is required.This presentation will discuss the types of applications where dielectric powder coatings are being used, the benefits they provide compared to alternative materials, and a high-level overview of formulation strategies. Specifically, the discussion will focus on how the type of epoxy resins, curing agents, fillers, and additives are chosen to achieve the desired balance of properties for a given application. The presentation is intended to provide raw material suppliers and formulators with a practical understanding of the opportunities and challenges associated with epoxy powder coatings in electrification applications. 

 

A Nano Revolution
Adam Malofsky, Nano Catalytics, Inc.

Nano Catalytics has developed an integrated nano-engineered platform combining encapsulation, dispersion, and conductive network design to overcome key limitations in thermoset systems. Using hybrid inorganic–carbon nanotube (CNT) architectures, the platform enables controlled cure kinetics, enhanced mechanical performance, and electrical conductivity at reduced filler loadings. Three complementary architectures provide these capabilities: particle-mediated encapsulation enables precise control of reactivity and supports stable, single-package epoxy, polyurethane, and acrylate formulations; silica–CNT hybrids improve dispersion, fracture toughness, and stiffness while maintaining processability; and chemically modified, branched CNT networks create efficient three-dimensional conductive pathways at lower loadings than conventional metallic fillers. Together, these technologies enable tunable latency, improved mechanical durability, and efficient electrical conductivity within a unified material design framework.


Silane-Free Coupling Agents: Novel Methods for Measuring Adhesion
Alannah Bartlett, Lubrizol
This presentation introduces novel, silane-free additive technologies developed to improve performance and properties of fillers incorporated into the polymer. Surface adsorption and adhesion are key to the performance of coatings on any surface. Having filler particles in proper alignment and adhered to the polymer matrix will allow for increased performance. Additives are often used to improve these properties but quantifying the level of adsorption is difficult. Existing silane-based coupling agents typically require an extra process step through activation with organic acids. Fundamental studies demonstrate limitations of traditional silane-based coupling. Through investigative experimental methods such as Quartz Crystal Microbalance with Dissipation (QCM-D), the critical role of pre-activation in silane function is demonstrated (in adhesion to glass), which, together with the difficulty in handling and processing of these additives, can limit their beneficial effects. This presentation will explore how this unique technique allows for nano-scale measurement of adsorption behavior and will connect the performance of these surface-active additives in this experimental method to real world performance such as material strength. Insights from similar investigations into existing adhesion promoters on metal substrates will be shared.  By eliminating the need for activation, this novel technology offers a more reliable, effective, and versatile solution for high-performance composites—unlocking new opportunities across industries.  

 

Improved Epoxy Impact and Toughness Using FORTEGRA Toughening Agents
Huifeng Qian, Olin Epoxy
Epoxy resins are widely used as matrix materials for coatings, adhesives, and fiber‑reinforced polymer (FRP) composites due to their excellent adhesion, high glass transition temperature, chemical resistance, and mechanical strength. However, conventional epoxy systems are inherently brittle. Highly crosslinked glassy thermosets exhibit high strength but low strain at elevated , while elastomeric thermosets offer high strain but reduced strength. An ideal epoxy material would display ductile behavior with a defined yield point.In this work, we evaluate a toughened epoxy system composed of a liquid epoxy resin and a FORTEGRA® toughening agent. In coating formulations cured with amines, the toughened epoxy significantly improves mandrel bending performance, cross‑hatch adhesion, forward/reverse impact resistance, and fracture toughness. In composite formulations cured with anhydrides, the toughened epoxy also increases tensile yield and fracture toughness. The FORTEGRA® toughening agent is based on Olin’s proprietary formulated long‑chain polymer technology, which enhances fracture toughness, tensile elongation, and impact resistance simultaneously.

 

Toughening Structural Adhesives Using Core–Shell Rubber Impact Modifiers
Samim Alam, Dow Chemical

Epoxy adhesives offer high strength and dimensional stability but are inherently brittle, while MMA adhesives also require improved toughness and durability under dynamic loading. Core–shell rubber (CSR) particles toughen crosslinked systems through cavitation and shear yielding, slowing crack growth with minimal impact on glass transition temperature because they do not plasticize the matrix. CSR performance in adhesives depends heavily on achieving uniform dispersion. To overcome dispersion challenges and improve formulation flexibility, Dow is developing CSR masterbatches based on PARALOID™ TMS Impact Modifiers (40 wt.% CSR in epoxy). Results showed that the masterbatch viscosity based on PARALOID™ TMS‑2670J and PARALOID™ TMS‑2672 was significantly lower than that of commercial CSR systems, offering improved ease of handling and greater formulation flexibility for customers. Incorporation of PARALOID™ TMS Impact Modifiers into epoxy-based crosslinked adhesive formulations resulted in a significant increase in K₁c, a measure of the material’s ability to resist crack growth under applied stress, compared to the neat epoxy without CSR. In MMA-based adhesive formulations,  PARALOID™ TMS Impact Modifiers exhibit lower viscosity development and support faster crosslinking when cured using a redox curing system consisting of a peroxide initiator and a tertiary amine accelerator.